Inclusive of all taxes
The Cover Block PVC Mould - 20 x 25mm - 42cvt. Small is a specialized mold designed specifically for manufacturing concrete cover blocks with precise dimensions of 20mm by 25mm. These cover blocks are essential in the construction industry to ensure the correct concrete cover over rebar, enhancing structural integrity and durability. Crafted from durable PVC material, this mold facilitates consistent, high-quality production of cover blocks by allowing easy filling, compaction, and curing of concrete mix. Its design supports efficient vibration or compaction techniques to eliminate air bubbles and achieve dense concrete. Ideal for manufacturers focused on producing small-sized cover blocks with reliable performance standards, this PVC mold ensures dimensional accuracy and durability in finished cover blocks, supporting stringent quality control measures. The mold aids in producing concrete cover blocks that meet industry specifications for concrete cover, contributing to robust and long-lasting reinforced concrete structures.
Key Features
| Features | Description |
|---|---|
| Material | Durable PVC plastic for long-lasting mold use |
| Block Size | 20 x 25 mm |
| Mold Type | 42 cavity (42cvt.) small block mold |
| Purpose | Manufacturing concrete cover blocks to maintain rebar cover |
| Ease of Use | Facilitates easy filling and compaction of concrete mix |
| Durability | Withstands repeated use without deformation |
| Application | Used in concrete block manufacturing plants and construction material production |
| Compliance | Supports production of cover blocks that meet structural and dimensional standards |
| Quality Assurance | Enables consistent mold dimension for quality control in cover block production |
| Attributes | Description |
|---|---|
| Mold Material | Polyvinyl Chloride (PVC) |
| Block Dimensions | 20 mm x 25 mm |
| Number of Cavities | 42 cavities per mold |
| Product Type | Concrete Cover Block Mould |
| Intended Use | Molding concrete cover blocks to ensure proper concrete cover over rebar |
| Manufacturing Process Compatibility | Compatible with vibration and compaction methods during molding |
| Durability | High resistance to wear and deformation |
| Color | Typically translucent or solid colored PVC |
| Weight | Insufficient Information |
| Standard Compliance | Supports production of cover blocks adhering to Indian construction standards |
*Disclaimer: The above description has been AI-generated and has not been audited or verified for accuracy. It is recommended to verify product details independently before making any purchasing decisions.
No, this specific PVC mold is designed exclusively for producing cover blocks of 20 x 25 mm size to maintain dimensional precision.
Yes, the mold supports ordinary Portland cement-based concrete mixes with fine and coarse aggregates, as typically used in cover block manufacturing.
The 42 cavity design allows simultaneous molding of 42 cover blocks, significantly enhancing production volume and operational efficiency.
Vibration and manual compaction can be effectively applied to eliminate air bubbles and achieve dense, durable cover blocks using this PVC mold.
Yes, after molding, cover blocks must be properly cured in a moist environment to achieve required strength and durability.
Concrete cover blocks are used in construction to maintain a specific distance between the reinforcing bars (rebar) and the outer surface of the concrete structure. This helps ensure that the rebar is adequately covered by concrete, which is crucial for the structural integrity and durability of the construction.
Here is a general overview of the manufacturing process for concrete cover blocks:
1.Raw Materials:
->Cement: Ordinary Portland Cement (OPC) or other suitable cement types.
->Aggregates: Fine and coarse aggregates such as sand and crushed stone.
->Water: Clean and potable water.
->Chemical Admixtures (optional): To improve specific properties of the concrete.
2.Mixing:
->The raw materials are mixed in the appropriate proportions to form a concrete mix.
->The mix should have the desired consistency and workability for molding.
3.Molding:
->The concrete mix is poured into molds to give the cover blocks their desired shape and size.
->The molds can be made of metal, plastic, or other materials and are designed to create the required dimensions for the cover blocks.
4.Compaction:
->Vibrators or other compaction methods are used to remove air bubbles and ensure that the concrete is evenly distributed within the mold.
->This step helps in achieving a dense and durable cover block.
5.Curing:
->The molded cover blocks need to be cured to attain sufficient strength and durability.
->Curing can be done by keeping the blocks in a moist environment for a specified period. This could involve covering them with wet burlap, using curing compounds, or placing them in a curing chamber.
6.Quality Control:
->Random samples of the manufactured cover blocks may be tested for compressive strength, dimensions, and other relevant properties to ensure they meet the required standards.
7.Packaging and Storage:
->Once the cover blocks have cured and passed quality control tests, they are packaged for transportation and storage.
->Proper packaging helps protect the cover blocks from damage during handling and transportation.
Inclusive of all taxes
You Save: 0
Rajkot , India
Manufacturer, Brand Owner, Distributor, Exporter, Wholesaler
GST- 24AQFPH0802G2ZH
