JS POWER CONTROL SYSTEMS

MENNEKES, AM-TOP IP44 Red Cable Mount Industrial Power Socket, Rated At 32A, 400 V 4 Pin female connector Part No-526

Features and Benefits- Single part body• Screw terminals for simple connection• Cable gland and sealing for extra protection• Integral cable strain relief preventing kinking• Easy opening and closing hinged lid, for added protection

Applications-• Agriculture: Portable equipment used or stored in sheltered environments.• Construction sites: Covered sites and buildings that could be exposed to splashes of water.• Entertainment and sports: Sheltered spaces protected from the weather but could be exposed to splashes of water.• Food industry: on indoor equipment subjected to light splashing.• Light Industry: Area’s that are not exposed to Extreme temperatures and humidity.• Ship yards and ports: Sheltered repair workshops and dock plant rooms.

Eaton EMT6 thermistor overload relays 1W , 24-240V50/60Hz, 24-240VDC, without reclosing lockout protect machines against overtemperature caused by heavy starting duties, braking, undervoltage, overvoltage, and high switching frequencies. When using these relays, a thermistor is used to monitor the temperature directly on the motor winding and, in the event of overtemperature, the corresponding signal is relayed to the EMT6 unit. Once the unit receives the signal, it trips, and the fault signal can be reliably detected
in the corresponding control panel. EMT6 units are also used to monitor the temperature of bearings, gears, oils, and coolants. Moreover, there are a variety of device models available with additional functionalities, including protection against the effects of voltage loss, short-circuit monitoring, and the ability to switch between automatic and manual switching-off.

Eaton DILM12-10(24VDC) - Contactor, 3 pole, 380 V 400 V 5.5 kW, 1 N/O, 24 V DC, DC operation, Screw terminals.. DC Operated added benefits-  Electronic actuated Coil as standard from 17A - 170A, Optional 185A onwards Suppressor Integrated into Coil Circuit: Cost savings, Easy engineering Direct actuation by PLC upto 32A: No need for coupler relays Same dimension as AC operated contactor: Easy engineering Wide band coil (0.7 - 1.3) as standard from17A - 170A: Reliable performance..

Eaton Molded Case Circuit Breakers (MCCB) NZM with Microprocessor Based Trip Unit Type AE, Rating 630Amp,3pole, braking capacity 50 kA,

Feature-
Global Approvals ; IEC,CSA,Shipping
On board diagnostics as standard
Complete suite of communicatio solutions- Modbus/ Profibus/ Ethernet /SWD
Energy Monitoring module with communication and /or panel front display
Special Versions: 1000VAC and upto 1500VDC
Microprocessor based Trip Unit:
Adjustable Thermal : 0.5-1.0 In
Adjustable  Magnetic: 2-12 In
Overload Pre Alarm LED
Withdrawable,Plug in& Motorized options
Ics=100% Icu
Applications:-
Ideal for panel builders, automation, engineering, and machinery OEMs. MCCBs offer overload protection from damage of excess current, overloads and short circuit, essential for motors, power generators, transformers, and other electrical equipment.

Eaton Moeller series NZM molded case circuit breaker electronic NZMN3-AE400 - Circuit-breaker, 3p, 400A NZM with Microprocessor Based Trip Unit Type AE.

Feature- Global Approvals: IEC, UL, CSA, ShippingOn board Diagnostics as standardComplete suite of communicationsolutions-Modbus/Profibus/Ethernet/SWDEnergy Monitoring module with communicationand/or panel front displaySpecial versions: 1000V AC and upto 1500V ACMicroprocessor based Trip Unit:Adjustable Thermal: 0.5 - 1.0 InAdjustable Magnetic: 2 - 12 InOverload Pre Alarm LEDWithdrawable, Plug in & Motorized options Ics = 100% Icu Applications:-
Ideal for panel builders, automation, engineering, and machinery OEMs. MCCBs offer overload protection from damage of excess current, overloads and short circuit, essential for motors, power generators, transformers, and other electrical equipment.

L&T GIC Hour Meter HM36 85-265 VAC Flush Mounting AC Version 90-264V LA25F1. Preset Electronic Timer Switch.

Feature-
Robust design with high degree of Accuracy and Compact size Frequency independent for AC applications Indicates operating time in hours and tenths with running indicators Totally sealed from Dust and Moisture Panel mountable with 7 Bezel options6 Digit Non-Resettable with automatic recycle to zero Wide supply voltage range: 4 – 36V AC/DC, 10 – 80V DC & 90 – 264V AC Shock & Vibration Proof.

Eaton PLSM-C63 Miniature circuit breaker 63Amp, 1pole Curve C.

Specifications-
Rated current: 0.5 A to 63 A
Rated voltage AC: 230/415V, DC: 48V (per pole)
Rated breaking capacity: 10kA acc. to IEC/EN 60898 Tripping Characteristics B, C, D
Low let-through energy
Bi connect optionally on load or line
Endurance: 20,000 operations
Full range of accessories: shunt, UV, auxiliary

FAZ-C10/2 - Miniature circuit breaker (MCB), 10 A, 2p, characteristic: C, UL 1077 DIN Rail Supplementary Protectors..

Feature -
Complete range of UL 1077 recognized DIN rail mounted miniature circuit breakers up to 63A current rating.
Standard ratings of 10 kAIC up to 277/480 Vac
Current limiting design provides fast short-circuit interruption that reduces the let-through energy, which can damage the circuit
Suitable for supplementary protection
Thermal-magnetic over current protection
Trip-free design–breaker can not be defeated by holding the handle in the ON position
Six levels of short-circuit protection, categorized by B,C,D,K,S and Z curves
Field-installable shunt trip and auxiliary switch subsequent mounting
Easy installation on DIN rail
Possibility for sealing the toggle in ON or OFF position
Application-
Supplementary protection
Control circuits
Lighting
Business equipment
Appliances

P3-63/I4/SVB-SW/HI11 - Main switch, P3, 63 A, surface mounting, 3 pole, 1 N/O, 1 N/C, STOP function, With black rotary handle and locking ring, Lockable in the 0 (Off) position..

Feature - Version as main switch Version as maintenance-/service switch

GIC Digital Timer Switch J648B1 GIC Make FM1 / Quartz Daily 240 VAC Base/DIN Mounting..

Feature -
• Modular construction
• Inbuilt over-ride facility
• High switching capacity
• Tamper proof sealing
• Analog version
• Daily/Weekly programming

Eaton Vaccum Contactors DILM580/22(RA250) - Contactor, 380 V 400 V 315 kW, 2 N/O, 2 NC, RA 250: 110 - 250 V 40 - 60 Hz/110 - 350 V DC, AC and DC operation, Screw connection

Features-
Global Approvals: IEC, UL, CSA, CE
Ideal for high dust and high switching duty applications
Direct actuation from PLC
Switching in Vaccum - very high electrical life
Low coil consumption: Energy saving

Application- Contactors for Motors

DILK50-10(230V50HZ,240V60HZ) - Contactor for capacitors, with series resistors, 50 kVAr, 230 V 50 Hz, 240 V 60 Hz
Features-
Welding - resistant for capacitors with inrush current peaks up to 180 X IN
The capacitors are pre-charged via the early-make auxiliary contacts
DILK..., cannot be combined with other auxiliary contacts
With group compensation multi-stage capacitor banks are connected to the mains are required
The contactors for capacitors are weld-resistant with inrush current peaks up to 180 X IN due to their special contacts

Application- Contactors for power factor correction

Eaton NZMH3-AE600-NA Molded case circuit breaker with Microprocessor Based Trip Unit Type AE 3pole, 600A, High Switching Capacity.
Features-
Global Approvals: IEC, UL, CSA, Shipping
On board Diagnostics as standard
Complete suite of communication solutions-Modbus/Profibus/Ethernet/SWD
Energy Monitoring module with communication and/or panel front display
Special versions: 1000V AC and upto 1500V A
Microprocessor based Trip Unit:
 Adjustable Thermal: 0.5 - 1.0 In
 Adjustable Magnetic: 2 - 12 In
 Overload Pre Alarm LED
Withdrawable, Plug in & Motorized options
Ics = 100% Icu

Application - Use in unearthed supply systems at 690 VBranch circuits, feeder circuits

Eaton DILM Power Contactor, 300amp, 380 V 400 V 160 kW, 2 N/O, 2 NC, RA 250: 110 - 250 V 40 - 60 Hz/110 - 350 V DC, AC and DC operation, Screw connection.

• Global Approvals: IEC, UL, CSA, CE
• Low Coil Consumption: Energy Savings
• High Electrical Lifespan
• Double Box Terminals: High Wiring Integrity & Reliability
• Coil Terminals on front as standard for quick & easy wiring
• Type 2 Coordinated Starters with PKZ MPCB’s & NZM MCCB’s
• Electronic Actuated Coil version available - Contact Eaton
  
  

DILM150(RAC240) - Contactor, 3 pole, 380 V 400 V 75 kW, RAC 240: 190 - 240 V 50/60 Hz, AC operation, Screw terminals.

Features:-
Global Approvals: IEC, UL, CSA, CE
Low Coil Consumption: Energy Savings
High Electrical Lifespan
Double Box Terminals: High Wiring Integrity & Reliability
Coil Terminals on front as standard for quick & easy wiring
Type 2 Coordinated Starters with PKZ MPCB’s & NZM MCCB’s
Electronic Actuated Coil version available- Contact Eaton
Application -Contactors for Motors

The 30A6B1 is a 36mm DIN Rail Hours Run/Elapsed Time Counter from GIC. It can be powered with the following voltages: 110Vac, 230Vac Panel Mount Timer, 90 VAC, 264 VAC, 99999.9 h..

Feature -
Robust design with high degree of Accuracy and Compact size
Frequency independent for AC applications
Indicates operating time in hours and tenths with running indicators
6 Digit Non-Resettable with automatic recycle to zero
Wide supply voltage range: 90 - 460V AC, 10 - 80V DC & 110 V DC
Suitable for Control Panel applications

GIC PTC Thermistor Relay, Din Rail, DPDT, 110 - 240 VAC, 2 C/O, PD-225 Series...

Feature-

• Monitors and Protects Motors with Integrated PTC Resistor sensors
• Protection against Over heating for Heavy Duty Load, High Switching Frequency, High operating temperature & Insufficient cooling conditions
• Wide Auxiliary Supply Voltage: 24 VAC/DC, 110 - 240 VAC & 220 - 415 VAC
• LED Indications for Healthy, Unhealthy, Sensor Open/Short conditions
• 1 C/O & 2 C/O Configuration
• Reset Options: Auto, Manual and Remote
  

DILM40(230V50HZ,240V60HZ) - Contactor, 3 pole, 380 V 400 V 18.5 kW, 230 V 50 Hz, 240 V 60 Hz, AC operation, Screw terminals..

Feature -
• Global Approvals: IEC, UL, CSA, CE
• Low Coil Consumption: Energy Savings
• High Electrical Lifespan
• Double Box Terminals: High Wiring Integrity & Reliability
• Coil Terminals on front as standard for quick & easy wiring
• Type 2 Coordinated Starters with PKZ  MPCB’s & NZM MCCB’s
• Electronic Actuated Coil version available - Contact Eaton

Eaton Moeller Series ETR4 Timer relay, 1W, 0.05s-100h, 24-240V50/60Hz, 24-240VDC, on-delayed,Din Rail.
ETR4-11-A from Eaton Moeller is ETR4 series analogue on-delay electronic timing relay. These timers are used in contactor control systems which require short rest times, high repetition accuracy, high switching frequency and long component life span.

Features-
On-delay timing function
UL, CSA approved
10 range of time selection between 0.05s to 100h
IP20 degree of protection
Operating voltage is 24VAC to 240VAC / 24VDC to 240VDC
Range and time selection potentio meters available
Rated operational current is 3A
1 changeover relay
DIN rail mountable

Application- Clock & Timing

DILM25-10(RDC24) - Contactor, 3 pole, 380 V 400 V 11 kW, 1 N/O, RDC 24: 24 - 27 V DC, DC operation, Screw terminals..

DC Operated added benefits
• Electronic actuated Coil as standard from 17A-170A, Optional 185A onwards
• Suppressor Integrated into Coil Circuit:  Cost savings, Easy engineering
• Direct actuation by PLC upto 32A: No need  for coupler relays
• Same dimension as AC operated contactor:  Easy engineering
• Wide band coil (0.7 - 1.3) as standard from  17A - 170A: Reliable performance.

Eaton auxiliary contact modules for Contactors DILA-XHI40 - Auxiliary contact module, 4 pole, Ith= 16 A, 4 N/O, Front fixing, Screw terminals, DILA, DILM7 - DILM38 Interlocked opposing contacts - High reliability and safety.

Features- Interlocked opposing contacts within an auxiliary contact module (according to IEC 60947-5-1 Annex L)

Applications -Industrial

GIC DMS120 Digital Voltage Monitoring Relay SM 800,Voltage 145-500 VAC,  1C/O + 1C/OSingle Phasing Preventor+ Selectable  Under Voltage + Selectable Over Voltage + Neutral  Loss ( Applicable for 3P4W).Power ON Delay 0 to 999 sec , OFF Delay 0.1 to 999 sec .

Feature -
LCD Display with Green backlight
Multi-Voltage: Three Phase 4 Wire & Three Phase 3 Wire @ 145-500 VAC
Protection against Phase loss, Phase Sequence, Phase Asymmetry, Under Voltage, Over Voltage, Neutral Open, Over Frequency and Under Frequency
Can be configured for 3 Phase 3 Wire or 3 Phase 4 Wire system
Selectable Over Voltage/ Under Voltage, Asymmetry, Phase Loss, Phase Sequence, Over Frequency/ Under Frequency
Adjustable ON/OFF Time Delay in seconds/ minutes
5A Single and Dual relay outputs
Two Separate Relay outputs with independent Programming
Password protection
Log of 5 previous faults for better monitoring
Fail safe/ Non-Fail safe relay output
Latch (Manual) and Non-Latch (Auto) Modes

The 30A6B1 is a 36mm DIN Rail Hours Run/Elapsed Time Counter from GIC. It can be powered with the following voltages: 110Vac, 230Vac Panel Mount Timer, 90 VAC, 264 VAC, 99999.9 h..

Feature -
Robust design with high degree of Accuracy and Compact size
Frequency independent for AC applications
Indicates operating time in hours and tenths with running indicators
6 Digit Non-Resettable with automatic recycle to zero
Wide supply voltage range: 90 - 460V AC, 10 - 80V DC & 110 V DC
Suitable for Control Panel applications