FIEO Registered
Our Products
Showing 1-24 of 40 products
Air & Water Pollution Testing Services for Industrial Compliance
Air and Water Pollution Testing Service for Industrial Compliance
This service provides emission and effluent testing to support environmental compliance and regulatory reporting. It helps EHS managers and compliance officers monitor pollutant loads and prepare submission-ready data for regulatory authorities.
Testing & Calibration Capability Overview
- Analyses: gas-phase emissions, particulate monitoring, wastewater chemical and biological parameters.
- Sample types accepted: stack gases, fugitive emissions samples, wastewater grab and composite samples.
- Instrumentation: GC, IC, TOC analyzers and spectrophotometers for parameter-specific analysis.
- Deliverables: analytical reports with detection limits, method notes and sampling chain-of-custody.
Turnaround & Commercial Terms
- Service Format: Field sampling support and in-lab analysis.
- Turnaround Time: Typically 5-10 working days for standard parameter sets; urgent tiers available.
- Sample/Equipment Requirement: Follow lab sampling protocol for containers and preservation.
- Pricing Basis: Priced per parameter panel and sampling logistics.
- Payment Structure: Standard partial advance with balance on report delivery.
Microbiological Testing Laboratory Services for Food, Pharma & Water
microbiological testing service for food, pharma and water
This microbiological testing service supports QA, regulatory and R&D teams assessing microbial contamination, sterility and hygiene in food, pharmaceutical products and water. Standard assays include total viable counts, pathogen detection and water quality indicator testing.
Testing & Calibration Capability Overview
- Culture-based enumeration and rapid molecular/pathogen detection options.
- Sterility and bioburden testing for pharmaceutical components where applicable.
- Water quality assays including coliforms, E. coli and heterotrophic plate counts.
- Method-referenced reporting aligned to client regulatory needs.
Engagement Terms & Scheduling
- Service Format: In-lab microbiological analysis with sample acceptance criteria and cold-chain handling.
- Turnaround Time: Typical 48–120 hours depending on method and organism.
- Sample Requirement: Preserved samples with chain-of-custody; volumes per method.
- Pricing Basis: Per-method and per-sample; rapid molecular assays priced separately.
Wood, Paper & Pulp Testing Laboratory Services for Export Products
Wood, Paper & Pulp Testing for Export Products
Wood, paper and pulp testing services provide mechanical, chemical and moisture analysis to support product quality and export compliance. Laboratories deliver data on tensile strength, burst, grammage, moisture content and pulp chemistry to help exporters and procurement teams meet buyer specifications and shipment requirements.
Scope of Testing, Calibration & Accreditation
- Mechanical tests: tensile, tear, and burst strength for paper products.
- Pulp analysis: Kappa number, residual lignin and bleaching chemical residues.
- Moisture and dimensional stability checks for wood-based panels.
- Reporting: data tables and interpretation aligned to buyer specifications.
- Traceability: method logs and calibration records accompany results.
Turnaround Time & Commercial Terms
- Service Format: In-lab testing with sample acceptance and conditioning protocols.
- Turnaround Time: Typically 5–10 working days depending on test suite and sample conditioning.
- Sample Requirement: Representative lots or panels as per the test method requirements.
- Pricing Basis: Quoted per-parameter and by sample volume; export bundling options available.
- Quality Assurance: Measurement uncertainty statements and calibration evidence provided with reports.
Sanitaryware Testing Laboratory Services for WC & Plumbing Products
Sanitaryware Testing for WC & Plumbing Products
Sanitaryware testing services evaluate dimensional accuracy, hydraulic performance and durability of WC and plumbing fixtures. The service is used by procurement, specification and QA teams to verify product fit, flow rates, sealing and long-term performance under operating conditions.
Service Scope & Accreditation Details
- Dimensional verification, flow rate, trap seal and flush performance testing.
- Durability cycles for mechanical parts such as flush valves and hinges.
- Material and surface integrity checks for glazing and finish.
- Detailed test reports supporting procurement acceptance and installation planning.
- Traceability through method logs and measurement records.
Booking & Turnaround Details
- Service Format: In-lab testing of fixtures and component assemblies; on-site inspection available for installed products.
- Turnaround Time: Typically 5–10 working days for standard suites; longer for expansive durability cycles.
- Sample Requirement: Production samples or representative assemblies per test program.
- Pricing Basis: Quoted per-test and by sample handling needs; bundled packages for vendor qualification are available.
- Quality Assurance: Calibration records and method details accompany each report.
Tyre & Tube Testing Laboratory Services for Automotive Suppliers
Tyre & Tube Testing for Automotive Suppliers
Tyre and tube testing services assess mechanical durability, pressure retention, and thermal behaviour to ensure safety and performance for automotive applications. The laboratory service supports supplier qualification, product development, and batch release by providing data on endurance, wear and sealing integrity.
Service Scope & Accreditation Details
- Endurance and fatigue testing under controlled load cycles.
- Pressure retention and leakage assessments for tube assemblies.
- Tread wear, rolling resistance and high-speed stability evaluations.
- Thermal ageing and ozone resistance checks for compound validation.
- Detailed reporting with test curves and pass/fail interpretation for procurement.
Booking & Turnaround Details
- Service Format: In-lab mechanical and thermal testing with instrumented fixtures.
- Turnaround Time: Typically 7–14 working days depending on endurance cycles and test program complexity.
- Sample Requirement: Multiple specimens per test type, often several assemblies for endurance cycles.
- Pricing Basis: Quoted per-test and per-cycle basis; comprehensive test programs are priced as packages.
- Quality Assurance: Instrument calibration and cycle traceability are included with final reports.
Toy Safety Testing Laboratory Services for Manufacturers & Importers
Toy Safety Testing for Manufacturers & Importers
Toy safety testing evaluates mechanical, physical, chemical and flammability hazards to ensure products meet applicable safety standards. The laboratory service helps manufacturers, importers and QA teams confirm compliance with regional toy safety requirements and supports documentation for market access.
Scope of Testing, Calibration & Accreditation
- Mechanical and physical tests for choking, sharp edges, and small parts where applicable.
- Chemical screening for restricted substances and migration tests where required.
- Flammability and thermal tests for relevant toy classes and materials.
- Performance tests for moving parts and durability under simulated use conditions.
- Detailed reporting for procurement and regulatory filing.
Booking & Turnaround Details
- Service Format: In-lab testing with method-driven sampling and functional verification.
- Turnaround Time: Typically 7–12 working days for comprehensive safety suites.
- Sample Requirement: Production samples representative of finished goods including packaging.
- Pricing Basis: Per-test and per-sample pricing depending on complexity and number of safety modules required.
- Quality Assurance: Method statements and result interpretation provided to support procurement decisions.
Textile Testing Laboratory Services for Apparel & Home Textile Buyers
Textile Testing for Apparel & Home Textile Buyers
Textile testing services evaluate fiber composition, mechanical strength, colorfastness and safety attributes for apparel and home textiles. The laboratory provides analytical and physical test suites used by product teams, sourcing and QA to verify supplier claims and ensure product performance under use conditions.
Scope of Testing, Calibration & Accreditation
- Fiber identification, composition analysis and blend verification.
- Mechanical tests: tensile, tear, and seam strength per standard methods.
- Colorfastness: wash, rub and light fastness tests to assess performance.
- Safety checks: restricted substance screening and flammability tests where applicable.
- Clear reporting with test data and compliance interpretation for procurement.
Turnaround Time & Commercial Terms
- Service Format: In-lab sample testing for fabric swatches, cut panels and finished products.
- Turnaround Time: Typically 5–9 working days for routine suites; extended timelines for specialised or batch-wide testing.
- Sample Requirement: Swatches or finished samples as per standard sampling protocols; quantity depends on the tests requested.
- Pricing Basis: Quoted per-parameter and by sample count; package rates for routine QC available.
- Quality Assurance: Method summaries and measurement uncertainty notes accompany reports.
Telecom Equipment Testing Laboratory Services for MTCTE Compliance
Telecom Equipment Testing for MTCTE Compliance
Telecom equipment testing services evaluate electrical, RF and EMC characteristics to meet MTCTE compliance requirements. This service is targeted at product teams, QA and regulatory functions that must demonstrate device conformance to telecom-specific safety and performance criteria before deployment.
Testing & Calibration Capability Overview
- RF performance testing, EMC/EMI assessments and electrical safety verification.
- Instrumentation: spectrum analyzers, network analyzers, and EMC chambers used for measurement.
- Test conditions: conducted and radiated emissions, immunity tests and protocol-level checks.
- Reporting: consolidated test reports with measured parameters and compliance commentary.
- Sample handling: detailed configuration and firmware state logs accompany each device test.
Booking & Turnaround Details
- Service Format: In-lab testing with pre-test setup and functional verification.
- Turnaround Time: Typically 7–12 working days for complete RF and EMC suites; extended for complex multi-band devices.
- Sample Requirement: Multiple units and a test-ready firmware image are recommended for full verification.
- Pricing Basis: Quoted per test suite, depending on bands and immunity levels required.
- Quality Assurance: Calibration logs and method statements are provided with reports.
Soaps & Detergents Testing Laboratory Services for FMCG Brands
Soaps & Detergents Testing for FMCG Brands
Soaps and detergents testing provides analytical and performance evaluation services for formulation, stability, and safety of consumer cleaning products. This testing service supports QA, regulatory and product development teams by quantifying active content, pH, foam performance, and stability under storage conditions.
Scope of Testing, Calibration & Accreditation
- Applicable tests: active matter content, pH, viscosity, foam stability, and microbial limits where required.
- Performance testing: wash-efficiency and fabric compatibility assessments per method protocols.
- Stability: accelerated ageing and storage-condition monitoring to predict shelf life.
- Reporting: batch-level results, method descriptions, and pass/fail criteria for product release.
- Traceability: sample logs and controlled method records for procurement audits.
Turnaround Time & Commercial Terms
- Service Format: In-lab sample testing with standard turnaround tiers.
- Turnaround Time: Typically 5–9 working days depending on test battery and microbial analyses.
- Sample Requirement: Representative production samples or retained lab samples per test method.
- Pricing Basis: Quoted per-parameter and by sample volume; consolidated packages for routine QC are available.
- Quality Assurance: Method statements and result variance reporting to support procurement decisions.
Mobile SAR Testing Laboratory Services for Handset Compliance
Mobile SAR Testing for Handsets and Wireless Devices
Mobile SAR testing measures radiofrequency energy absorption from handsets and wearable wireless devices to ensure compliance with human exposure limits. The laboratory service provides test setups and measurement procedures that quantify Specific Absorption Rate (SAR) under representative usage conditions for procurement and certification workflows.
Testing & Calibration Capability Overview
- Applicable standards and measurement protocols for SAR assessment.
- Measurement equipment: SAR phantom models, probe systems and network analyzers.
- Test conditions: body-worn and head models across multiple frequency bands.
- Reporting: measured SAR values, scan maps and compliance verdicts aligned to applicable exposure limits.
- Sample handling: device firmware state, power control and positioning logs are recorded.
Engagement Terms & Scheduling
- Service Format: In-lab SAR measurement with pre-test setup verification and firmware control.
- Turnaround Time: Typically 7–10 working days for full-band SAR suites; multi-band or repeat testing may require longer.
- Sample Requirement: Multiple production samples or engineering prototypes per measurement campaign.
- Pricing Basis: Pricing per campaign driven by number of frequency bands and positioning variants.
- Quality Assurance: Measurement uncertainty and calibration records accompany final reports.
Rubber & Polymer Testing Laboratory Services for Industrial Products
Rubber & Polymer Testing for Industrial Products
Rubber and polymer testing services evaluate mechanical, thermal and chemical performance of elastomers and polymer components. The laboratory service helps procurement, R&D and QA teams confirm material grade, validate supplier claims, and assess suitability for end-use conditions.
Testing & Calibration Capability Overview
- Tensile and elongation testing using universal testing machines for strength and elongation metrics.
- Hardness measurement (Shore A/D) and compression set evaluations per relevant test methods.
- Thermal analysis (DSC/TGA) for service temperature and degradation profiling.
- Chemical resistance and extraction testing for formulation validation.
- Detailed test reports with measured values and pass/fail guidance for procurement.
Engagement Terms & Scheduling
- Service Format: In-lab testing for samples and components; limited on-site sampling support available.
- Turnaround Time: Typically 5–8 working days for standard mechanical and thermal suites; extended timelines for complex combinational testing.
- Sample Requirement: Typical 2–5 specimens depending on test method; larger panels may be required for compositional analysis.
- Pricing Basis: Priced per-parameter and sample prep; combined test packages available for full qualification.
- Quality Assurance: Method statements and measurement uncertainty are provided to support procurement decisions.
Electrical Appliance Testing Laboratory Services for Safety Compliance
electrical appliance safety testing for consumer and industrial products
Third-party safety testing for electrical appliances to validate compliance with national and international safety standards. The service supports procurement, vendor qualification and pre-shipment checks.
Service Scope & Accreditation Details
- Electrical safety tests: earth continuity, insulation resistance, leakage current and overload protection.
- Functional tests: cycle endurance, temperature rise and performance verification.
- Instrumentation: hipot testers, thermal chambers, programmable load banks.
- Deliverables: Method-referenced test report and corrective action notes.
Booking & Turnaround Details
- Service Format: In-lab type testing and model evaluation.
- Turnaround Time: Typically 6–10 working days depending on tests requested.
- Sample Requirement: One model sample for type testing; additional units for endurance assessment.
- Pricing Basis: Priced per model and test matrix complexity.
Electrical Components Testing Laboratory Services for Wiring Accessories
wiring accessories testing service for electrical components
Testing services for wiring accessories aimed at procurement and QA teams validating switches, sockets and connectors. The service focuses on contact resistance, dielectric strength and mechanical life testing for component acceptance.
Testing & Calibration Capability Overview
- Applicable tests: dielectric withstand, contact resistance, mechanical endurance and flammability.
- Instrumentation: hipot testers, contact resistance meters, endurance cycling rigs and UL/IEC-style test jigs.
- Products covered: switches, sockets, plugs, connectors and modular accessories.
- Deliverables: Method-referenced test report and failure analysis.
Engagement Terms & Scheduling
- Service Format: In-lab component and sample testing.
- Turnaround Time: Typically 5–8 working days for standard electrical tests.
- Sample Requirement: Representative sample sets, commonly 5–10 pieces for endurance testing.
- Pricing Basis: Priced by test matrix and sample volume.
White Goods Testing Laboratory Services for Consumer Durable Brands
white goods testing service for consumer durable brands
Third-party white goods testing for manufacturers and procurement teams focused on electrical safety and performance validation. The service supports model-level verification before market release and vendor qualification.
Testing & Calibration Capability Overview
- Applicable tests: electrical safety, insulation, earth continuity, leakage, functional cycling.
- Instrumentation: hipot testers, leakage current meters, thermal chambers for endurance cycles.
- Products covered: refrigerators, washing machines, air conditioners and kitchen appliances.
- Deliverables: Test report with pass/fail matrix and corrective action notes.
Engagement Terms & Scheduling
- Service Format: In-lab type testing and sample evaluation.
- Turnaround Time: Typically 7–10 working days for standard safety and performance tests.
- Sample Requirement: One production sample per model for type testing; additional samples for endurance cycles.
- Pricing Basis: Priced per model and test matrix, including endurance and environmental stress tests.
Chemical Testing Laboratory Services for Industrial Products & Exports
chemical testing service for industrial products
This NABL-accredited chemical testing service covers industrial product quality verification and export compliance testing. The service addresses compositional analysis, contaminant screening and export-readiness checks for procurement and QA teams.
Scope of Testing, Calibration & Accreditation
- Applicable methods: wet chemistry assays, GC, HPLC, ICP-OES where relevant.
- Accreditation: NABL scope and ISO/IEC 17025 methodology applied to analytical methods.
- Sample types accepted: bulk product, raw inputs and packaged consignments.
- Deliverables: Traceable test report with uncertainty statement and method references.
Turnaround Time & Commercial Terms
- Service Format: In-lab testing and limited on-site sample collection.
- Turnaround Time: Typically 5–7 working days for standard single-parameter tests; multi-parameter panels take longer.
- Sample Requirement: Typically 2–3 representative samples per test battery.
- Pricing Basis: Priced per engagement by parameter count, matrix complexity, and TAT tier.
Building Material Testing Laboratory Services for Construction Products
Building Material Testing Service for Construction Products
This service performs mechanical, structural and durability testing for construction materials. It supports engineers, project procurement and QA teams validating material fitness for purpose and safety requirements.
Service Scope & Accreditation Details
- Test types: compressive strength, flexural tests, moisture and durability assessments.
- Sample types accepted: concrete cubes, masonry specimens, aggregates and finished components.
- Instrumentation: compression frames, flexural rigs and environmental conditioning chambers.
- Deliverables: test reports, strength curves and conformity notes.
Booking & Turnaround Details
- Service Format: In-lab testing with options for on-site sampling and inspection.
- Turnaround Time: Typically 7-14 working days for standard structural tests; extended for long-duration durability trials.
- Sample/Equipment Requirement: Provide standard-cured specimens according to method guidance.
- Pricing Basis: Priced by test scope, specimen prep and conditioning requirements.
- Payment Structure: Partial advance with balance on report delivery; contract programs available for repeat testing needs.
AYUSH Product Testing Laboratory Services for Herbal & Wellness Brands
AYUSH Product Testing Service for Herbal & Wellness Brands
This service offers microbiological, heavy metal and phytochemical testing tailored to AYUSH formulations and herbal products. It supports quality teams, regulatory compliance and product safety verification prior to market release.
Testing & Calibration Capability Overview
- Analyses: heavy metals, pesticide residues, microbial limits and phytochemical profiling.
- Sample types accepted: finished formulations, raw botanicals, powders and extracts.
- Instrumentation: ICP-MS, HPLC, GC-MS and microbiology incubators.
- Deliverables: analytical reports with method notes and detection limits.
Engagement Terms & Scheduling
- Service Format: In-lab analysis with sample receipt and chain-of-custody.
- Turnaround Time: Typically 5-10 working days for standard panels; extended for pesticide multi-residue screens.
- Sample/Equipment Requirement: Provide representative batches and labeling information.
- Pricing Basis: Priced per parameter panel and sample prep complexity.
- Payment Structure: Typical partial advance with balance on report delivery; contract programs for recurring QC are available.
Automobile Component Testing Laboratory Services for OEM Suppliers
Automotive Component Testing Service for OEM Suppliers
This service offers mechanical, material and durability testing tailored to automotive components. It supports OEM procurement, supplier qualification and product validation for safety-critical parts.
Testing & Calibration Capability Overview
- Test types: tensile, fatigue, impact, dimensional and surface integrity checks.
- Sample types accepted: metal stampings, plastic injection parts, assemblies and fasteners.
- Instrumentation: tensile rigs, fatigue machines, impact testers and CMMs.
- Deliverables: test data, failure-mode analysis and conformity statements.
Booking & Turnaround Details
- Service Format: In-lab mechanical testing and dimensional inspection.
- Turnaround Time: Typically 7-14 working days for standard mechanical batteries.
- Sample/Equipment Requirement: Supply representative parts and drawing references.
- Pricing Basis: Priced by test list, specimen prep and inspection effort.
- Payment Structure: Partial advance with balance on report delivery; contract options available.
Adhesives, Tapes, Paints & Varnishes Testing Laboratory Services
Adhesives, Paints & Coatings Testing Service
This service covers mechanical, chemical and durability testing for adhesives, tapes, paints and varnishes. It supports formulation teams, QC labs and procurement groups verifying adhesion, cure, weathering and chemical resistance.
Testing & Calibration Capability Overview
- Applicable methods: adhesion tests, tensile-shear, peel strength and accelerated weathering protocols.
- Sample types accepted: adhesive films, coated panels, tape specimens and varnished substrates.
- Key measures: peel strength, shear, hardness, gloss and chemical resistance.
- Deliverables: data tables, failure-mode descriptions and durability summaries.
Engagement Terms & Scheduling
- Service Format: In-lab specimen preparation and instrumented mechanical testing.
- Turnaround Time: Typically 5-10 working days for standard mechanical and chemical batteries.
- Sample/Equipment Requirement: Provide coated panels or tape strips per test standard dimensions.
- Pricing Basis: Priced by test list, specimen prep and accelerated weathering durations.
- Payment Structure: Partial advance with balance on report delivery; contract options for recurring QC programs.
Solar PV Module Testing Laboratory Services for Renewable Energy Products
Solar PV Module Testing Service for Renewable Energy Projects
This service evaluates electrical performance, environmental durability and degradation behaviour of PV modules. It is aimed at project developers, procurement teams and QA engineers validating modules for project deployment and warranty claims.
Service Scope & Accreditation Details
- Applicable standards: module performance and reliability protocols for PV modules.
- Test types: IV curve performance, temperature cycling, damp heat and PID susceptibility.
- Instrumentation: solar simulators, environmental chambers and IV tracers.
- Deliverables: performance certificates, degradation reports and measurement data.
Booking & Turnaround Details
- Service Format: In-lab module testing and conditional on-site sample intake.
- Turnaround Time: Typically 7-14 working days for standard electrical and environmental checks; extended for long-term degradation tests.
- Sample/Equipment Requirement: Provide representative modules with datasheets and serial traceability.
- Pricing Basis: Priced by test scope, module size and environmental sequences required.
- Payment Structure: Partial advance with balance on report delivery; contract options for recurring project evaluations.
RoHS & WEEE Compliance Testing Services for Electronics Manufacturers
RoHS & WEEE Compliance Testing for Electronics Manufacturers
RoHS & WEEE compliance testing is a targeted laboratory service that verifies restricted substance limits and product marking obligations for electronic assemblies and finished devices. The service focuses on heavy metals, phthalates and other restricted substances defined by RoHS and WEEE regimes and maps test results to regulatory thresholds used by product compliance and procurement teams.
Scope of Testing, Calibration & Accreditation
- Applicable Standards: RoHS test methods and referenced EN/IEC procedures where relevant.
- Test Methods: Chemical screening and instrumental analysis such as ICP-OES or ICP-MS for metal quantification.
- Sample Types: PCBs, assemblies, connectors, cable harnesses and plastic parts with surface finishes.
- Reporting: Detailed test reports with measured concentrations and pass/fail against regulatory limits.
- Traceability: Laboratory method logs and measurement logs for procurement review.
Turnaround Time & Commercial Terms
- Service Format: In-lab testing with sample submission; limited on-site sample pickup where available.
- Turnaround Time: Typical 5-7 working days for standard RoHS suites; extended schedules for multi-parameter or confirmatory testing.
- Sample Requirement: Representative samples or part numbers per test standard; typically 2–3 units or material coupons for full analysis.
- Pricing Basis: Pricing is per-scope and driven by number of parameters, sample prep, and method complexity.
- Payment Structure: Standard B2B engagement terms with partial advance and balance on report delivery.
RF Testing Laboratory Services for Wireless & Telecom Devices
rf testing service for wireless and telecom devices
This RF testing service supports product, RF engineering and regulatory teams validating transmitter power, spectrum occupancy, receiver sensitivity and coexistence for wireless devices. The service provides measured performance data for design tuning and approval workflows.
Testing & Calibration Capability Overview
- Transmitter power and spectral mask verification using spectrum analyzers.
- Receiver sensitivity and selectivity testing with signal generators and shielded enclosures.
- OTA and conducted measurements for antenna and RF front-end evaluation.
- EMI/EMC pre-compliance assessments to anticipate certification risks.
Engagement Terms & Scheduling
- Service Format: In-lab RF test chambers and conducted test setups.
- Turnaround Time: Typical RF characterization 3–7 working days; full compliance campaigns require scheduling.
- Sample Requirement: Prototype or production units with power and interface access.
- Pricing Basis: Per-test parameter, chamber time and measurement complexity.
Pump & Motor Testing Laboratory Services for Water Supply Products
pump and motor testing service for water supply products
This pump and motor testing service supports water utilities, OEMs and project engineers with performance validation, hydraulic curve generation and endurance testing. Results inform selection, system design and acceptance testing for supply projects.
Testing & Calibration Capability Overview
- Hydraulic performance testing across duty points with flow and head measurement.
- Motor electrical efficiency, vibration and alignment checks.
- Endurance and cavitation susceptibility assessments.
- Reporting with characteristic curves and operational recommendations.
Engagement Terms & Scheduling
- Service Format: In-lab and test-rig evaluation; mobile test rigs for on-site acceptance where feasible.
- Turnaround Time: Typically 5–14 working days depending on duty-cycle testing required.
- Sample Requirement: Fully assembled pump units with motor coupling and connection points.
- Pricing Basis: Per-test program and duration; on-site testing carries travel and rig fees.
Plastic Product Testing Laboratory Services for Packaging & OEM Goods
plastic product testing service for packaging and OEM goods
This plastic testing service is for packaging, quality and product teams validating polymer performance and regulatory fit. Tests include tensile and impact properties, barrier and permeability tests, chemical migration and aging studies to ensure fit-for-purpose behavior.
Testing & Calibration Capability Overview
- Mechanical testing: tensile, flexural and impact assessments.
- Chemical resistance and migration screening for food-contact applications.
- Barrier and permeability testing for packaging performance.
- Aging and environmental stress tests to assess lifecycle behaviour.
Engagement Terms & Scheduling
- Service Format: In-lab product and material testing with sample preparation guidance.
- Turnaround Time: Typically 5–10 working days depending on the test suite.
- Sample Requirement: Representative parts or film samples; number depends on test matrix.
- Pricing Basis: Per-test and per-sample; migration and chemical analyses priced separately.
GL Trustmark
