STEARIC ACID
HS Code: 38231190
Chemical Formula: C18H36O2

Description

Stearic acid is a saturated fatty acid with an 18-carbon chain and has the IUPAC name octadecanoic acid. It is a waxy solid and its chemical formula is C17H35CO2H. The salts and esters of stearic acid are called stearates. As its ester, stearic acid is one of the most common saturated fatty acids found in nature following palmitic acid. The triglyceride derived from three molecules of stearic acid is called stearin.

Properties

Formula: C18H36O2

Molar mass: 284.48 g/mol

Boiling point: 361 °C

Density: 941 kg/m³

Appearance: White solid

Stearic Acid

We offer an exclusive range of Stearic Acid flame retardants that are formulated from best grades of chemicals. These are stringently tested on quality parameters testing for the accurate composition, effectiveness, pH value, purity etc.

Feature : White crystalline Powder/Flakes.

Applications

Cosmetics and chemical specialty

Textile auxillaries,Plastics, Cosmetics and Stearates

Activated calcium carbonate industry, Buffing compounds

Metal polishes and Metallic stearates.

Tyre rubber compounding

General rubber compounding.

Grease

Phosphoric Acid

CALCIUM CHLORIDE FUSED

HSN Code 28272000

Calcium chloride is an inorganic compound, a salt with the chemical formula CaCl?. It is a white coloured crystalline solid at room temperature, and it is highly soluble in water. It can be created by neutralising hydrochloric acid with calcium hydroxide.

Molar mass : 110.98 g/mol

Formula : CaCl2

IUPAC ID : Calcium chloride

Boiling point : 1,935 °C

Melting point : 772 °C

Soluble in : Water, Acetic acid, Alcohol, Acetone

Calcium Chloride Fused Lumps that are widely used in cement manufacturing, concrete additive and oil drilling wells, bitumen industries, iceing industries if etc.,

Product Features:

• Purity

• Correct formulation

• Effectiveness

• Long shelf life

APPLICATIONS

Calcium chloride is a versatile product providing unique contributions in widely varying applications:-

Agriculture: Post-Harvest

Agriculture: Pre-Harvest

Brining

Concrete Acceleration

Drilling Fluid Additive

Food Processing

Hydrocarbon Dehydration

Ice Melting: Road & Highway

Ice Melting: Sidewalks

Industrial

Refrigeration

YELLOW OXIDE
HS Code:28211010

Chemical Formula:FeO(OH)
Description 

Yellow oxide is one kind of oxides with stable chemical properties. Iron oxide yellow is widely used in painting, scagliola and concrete due to its bright and pure color, good weather proof and high opacity, also can be used as colorant for ink, rubber, paper and so on.

Properties

Color: Yellow
Density (g/cm3): 0.2 to 0.7
Physical State: Solid, fine amorphous powder
Solubility in Water: Slightly
Boiling Point (°C): Not applicable
Flash Point: Not flammable
Specific Gravity: 4.1 to 4.3
pH Value: Neutral
Odor: Odorless

Uses

Yellow iron oxide (CAS 51274-00-1) is used as a pigment, e.g. Pigment Yellow 42 or C.I. 77492. Pigment Yellow 42 is Food and Drug Administration (FDA) approved for use in cosmetics and is used in some tattoo inks. Solid material color ranges from yellow through dark-brown to black. Iron oxide-hydroxide is also used in aquarium water treatment as a phosphate binder.Recently, two forms of Iron oxide-hydroxides nanoparticles were identified as very good adsorbents for lead removal from aquatic media.

IPA ( Iso Propyl Alcohol )
HS Code:29051220

Chemical Formula:C3H8O
Description 

Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol) is a compound with the chemical formula C3H8O. It is a colorless, flammablechemical compound with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcoholcarbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether. It is used in the manufacture of a wide variety of industrial and household chemicals, and is a common ingredient in chemicals such as antiseptics, disinfectants and detergents Properties Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform. It will dissolve ethyl cellulose, polyvinyl butyral, many oils, alkaloids, gums and natural resins. Unlike ethanol or methanol, isopropyl alcohol is not miscible with salt solutions and can be separated from aqueous solutions by adding a salt such as sodium chloride. The process is colloquially called salting out, and causes concentrated isopropyl alcohol to separate into a distinct layer. Isopropyl alcohol forms an azeotrope with water, which gives a boiling point of 80.37 °C (176.67 °F) and a composition of 87.7 wt% (91 vol%) isopropyl alcohol. Water-isopropyl alcohol mixtures have depressed melting points.[9] It has a slightly bitter taste, and is not safe to drink.[9][10] Isopropyl alcohol becomes increasingly viscous with decreasing temperature and will freeze at −89 °C (−128 °F). Isopropyl alcohol has a maximum absorbance at 205 nm in an ultraviolet-visible spectrum.

Iso Propyl Alcohol Uses and Applications

Solvent

Isopropyl alcohol dissolves a wide range of non-polar compounds. It also evaporates quickly, leaves nearly zero oil traces, compared to ethanol, and is relatively non-toxic, compared to alternative solvents. Thus, it is used widely as a solvent and as a cleaning fluid, especially for dissolving oils.

Medical

Isopropyl alcohol is used as a water-drying aid for the prevention of otitis externa, better known as swimmer’s ear. Early uses as an anesthetic Although isopropyl alcohol can be used for anesthesia, its many negative attributes or drawbacks prohibit this use. Isopropyl alcohol can also be used similarly to ether as a solvent or as an anesthetic by inhaling the fumes or orally. Early uses included using the solvent as general anesthetic for small mammals and rodents by scientists and some veterinarians. However, it was soon discontinued, as many complications arose, including respiratory irritation, internal bleeding, and visual and hearing problems. In rare cases, respiratory failure leading to death in animals was observed.

Laboratory

As a biological specimen preservative, isopropyl alcohol provides a comparatively non-toxic alternative to formaldehyde and other synthetic preservatives. Isopropyl alcohol solutions of 70–99% are used to preserve specimens.

Available in 160 Kgs Carboy

SULPHUR POWDER RUBBER GRADE

HS CODE 25030090

Sulfur is a chemical element with the symbol S and atomic number 16. It is abundant, multivalent, and nonmetallic. Under normal conditions, sulfur atoms form cyclic octatomic molecules with a chemical formula S. Elemental sulfur is a bright yellow, crystalline solid at room temperature.

Symbol : S

Atomic mass : 32.065 u

Atomic number : 16

Electron configuration : [Ne] 3s²3pâ�´

Electronegativity : 2.58

Group: Chalcogen (group 16)

Having various Sulphur powder like rubber grade, Industrial Grade and Agriculture grade

INDUSTRIAL GRADE SULPHUR POWDER

99.5% Sulphur)industrial grade sulphur powder is used mainly in the manufacture of fire works, explosives, matches and pharmaceuticals

1. Insoluble sulfur exists in rubber in a dispersive state. It can prevent the booming of rubber, having a better viscosity, and at the same time can ensure the outer appearance of the products with light color.

2. Insoluble sulfur can disperse uniformly in rubber, so it can prevent the conglomeration of sulfur, and reduce the tendency of being scorched during store.

3. Insoluble sulfur can prevent the blooming of rubber during its store. It make it possible to keep rubber's characteristics uniform, overcoming the defects of bad viscosity resulted from blooming, avoiding the pollution of products as well as moulds and cut down the gelatinizing step specially appended for preventing blooming.

4. No migration in adjacent layers of rubber. The migration speed of common sulfur is very high especially in butyl rubber, and with the incorporation of insoluble sulfur, such phenomena can be avoided.

5. Shorten the vulcanization time. When reaching the temperature for vulcanization, insoluble sulfur will go through a stage of activation, that is to say, a chain de-polymerization, which can quicken the vulcanization speed, reducing the amount of sulfur used, improving the aging characteristic of products.

Therefore, due to its non-blooming characteristic, insoluble sulfur is widely used in the manufacture of radial rubber and other synthetic rubber products, also in the light-colored rubber products in which common sulfur is incorporated in high proportion.

Following is a table of technical specifications for catalog products:

Product Purity Ash Acidity Heat Loss Fineness

RMS 99.5% Min 0.10% Max 0.01% Max 0.15% Max 200 mesh 98% Passing

Superfine 99.5% Min 0.10% Max 0.01% Max 0.15% Max 325 mesh 94% Passing

N-Hexane

n-Hexane, also known simply as hexane, is a straight-chain alkane with the chemical formula C6H14. It is a colorless liquid with a gasoline-like odor. Here are some of its applications:

1. **Solvent**: Hexane is primarily used as a solvent in various industrial processes. Its low boiling point and non-polar nature make it effective for dissolving oils, fats, waxes, and other non-polar compounds. It is commonly used in the extraction of vegetable oils from seeds, such as soybeans, sunflowers, and canola. Hexane is also used as a solvent in the production of adhesives, coatings, and inks.

2. **Laboratory Use**: Hexane is widely used in laboratories as a solvent for chromatography and other analytical techniques. It is particularly useful for the extraction and purification of non-polar compounds.

3. **Cleaning Agent**: Due to its ability to dissolve grease, oil, and other organic residues, hexane is employed as a cleaning agent in various industries. It is used for degreasing metal parts, cleaning machinery, and removing residues from manufacturing equipment.

4. **Adhesive Manufacturing**: Hexane is a key component in the production of certain adhesives, particularly those based on rubber or polymers. It helps to dissolve the adhesive ingredients and improve their application properties.

5. **Paints and Coatings**: Hexane is used as a solvent in the formulation of paints, coatings, and varnishes. It aids in dissolving resins, pigments, and other components, facilitating the application and drying of the final product.

6. **Extraction of Essential Oils**: In addition to vegetable oils, hexane is used in the extraction of essential oils from aromatic plants. It is an efficient solvent for extracting the aromatic compounds, which are used in perfumes, cosmetics, and flavorings.

7. **Fuel Additive**: Hexane is sometimes used as a fuel additive to improve the octane rating of gasoline. However, its use in this capacity is less common compared to other additives.

It's important to handle hexane with caution as it is highly flammable and can pose health risks if inhaled or absorbed through the skin. Proper safety measures, including adequate ventilation and personal protective equipment, should be followed when working with hexane.

Calcium Lignosulphonate

Calcium silicon, containing 22-35% calcium and 60-65% silicon. It is mainly used as an inoculant for cast iron. Calcium silicon alloy has a strong reducing ability and is also used as a deoxidizer for high-quality steel. Since calcium is very active at steelmaking temperature, the effect is not easy to be stable, so it is advisable to add some kind of retarder.

As a deoxidizer for steel, silicon-calcium-barium alloy or silicon-calcium-barium-aluminum alloy, or silicon-calcium-manganese alloy is mostly used.

Application

Since calcium has a strong affinity with oxygen, sulfur, hydrogen, nitrogen and carbon in molten steel, silicon-calcium alloys are mainly used for deoxidation, degassing and fixation of sulfur in molten steel.

Calcium silicon produces a strong exothermic effect when added to molten steel.Calcium turns into calcium vapor in molten steel, which has a stirring effect on molten steel and is beneficial to the floating of non-metallic inclusions. After the silicon-calcium alloy is deoxidized, non-metallic inclusions with larger particles and easy to float are produced, and the shape and properties of non-metallic inclusions are also changed.Therefore, silicon-calcium alloy is used to produce clean steel, high-quality steel with low oxygen and sulfur content, and special performance steel with extremely low oxygen and sulfur content.The addition of silicon-calcium alloy can eliminate the nodulation of the steel with aluminum as the final deoxidizer at the ladle nozzle, and the clogging of the nozzle of the tundish of continuous casting | ironmaking. In the refining technology outside the furnace of steel, silicon-calcium powder or core wire is used for deoxidation and desulfurization to reduce the content of oxygen and sulfur in steel to a very low level; it can also control the form of sulfide in steel and improve the utilization rate of calcium. In the production of cast iron, in addition to deoxidation and purification, silicon-calcium alloy also plays an inoculating role, which helps to form fine-grained or spherical graphite; makes the graphite in gray cast iron evenly distributed, reduces the whitening tendency; and can increase silicon and desulfurize , Improve cast iron quality.

AVAILABLE IN 25/50 KG BAG

SODA ASH LIGHT

HS Code: 28362090

Sodium carbonate

Sodium carbonate, Na?CO?·10H?O, is the inorganic compound with the formula Na?CO? and its various hydrates. All forms are white, odourless, water-soluble salts that yield moderately alkaline solutions in water. Historically, it was extracted from the ashes of plants growing in sodium-rich soils.

Formula: Na2CO3

Molar mass: 105.9888 g/mol

Density: 2.54 g/cm³

Melting point: 851 °C

Boiling point: 1,600 °C

ChemSpider ID: 9916

Soluble in: Water

Description

Light Soda Ash is an important basic industrial alkali chemical used in soap and detergents, pulp and paper, iron and steel, aluminium cleaning compounds, water softening and dyeing, in fiber reactive dyes, effluent treatment and production of chemicals.

Uses

Soda ash is most commonly used in:

Manufacture of glass, where it reduces the melting temperature of the sand used in

glass formation and helps in the 'workability' or shaping of glass articles such as tableware and float glass, Making soaps and detergents, where it is employed as a builder, or filler, to give a smoother surface, Production of chemicals such as sodium silicate, sodium bicarbonate and per carbonate, and sodium chromate and dichromate, Pulp and paper manufacture, water treatment, effluent treatment, metallurgy and drugs.

Glass: The glass industry is a large consumer sector of soda ash consumption per ton of glass is 0.2T.

Detergent : It is used as detergent in wool rinsing medicine and tanning.

Printing and dyeing : Printing and Dyeing industry is used as a water softener.

Buffer: As buffering agent, neutralize and dough improver it can be used for pastry and noodle food and can be used appropriately according to production needs

QUARTZ

HS CODE 25061020

AVAILABLE IN

QUARTZ POWDER

QUARTZH LUMPS

QUARTZ GRITS

QUARTZ PEBBLE

Quartz is a mineral that’s easily available from the crust of earth. And yet, it’s quite valuable for its vast usage.

CHEMICAL TERM

SiO2 (Silica, or silicon dioxide).Found in igneous, metamorphic and sedimentary rocks.

USAGE

Quartz is mostly required in the production of Engineering Quartz stones, Silicate Glasses and Ceramics.

TECHNICAL SPECIFICATIONS

Properties Unit Value

SiO2 % 99.70% (00.20%)

Fe2O3 % 00.04% (max)

Al2O3 % 00.12% (00.05%)

Cr2O3 % 0.00040 (max)

TiO2 % 0.016

LOI % 0.17

Refractive index — 1.544 – 1.553 – Dr + 0.009 (B – G interval)

Specific gravity — 2.65 constant; variableinimpure varieties

Melting point — 1650 (75) 0C

Streak — White

Boiling point — 22300C

Crystal system — Trigonal

Solubility — H2O insoluble

Available Mesh Size : 100 / 150 / 200 / 250 / 300 / 500, 30 x 80 / 40 x 150 / 24 x 60 / 20 x 80 / 36 x 150 / 2mm / 1mm / 0.5m

HYDRATED LIME POWDER

HS CODE:25223000

Color White
Packaging Type 25/40/50 Kgs
Usage/Application Industrial
Formula Ca(OH)2

Our range of lime powder is also known as hydrated lime or calcium hydroxide or slaked lime that is used in solution as a bleach. Our range is a dry powder that is formulated by controlled slaking of quicklime with water.

We offer the best Quality products of Lime suitable for versatile uses. Consistency in Quality and suitability for customers are the major merits of our products. Our products are available under the following technical specification in which we can make available a different percentage of parameters like moisture, acid insoluble, mesh size, etc. than the one mentioned below according to the needs of customers.

uses

Hydrated Lime having higher percentage of Calcium Hydroxide (+90%) over low grade (65% Purity)Hydrated Lime :

REDUCED REACTION TIME : The rate of chemical reaction depends upon the degree of purity of the Chemical being used. Higher the purity , lesser would be the reaction time .

REDUCED CONSUMPTION : By Quantitative Analysis it is established that 1 M.T. of 90% grade Hydrated Lime is equivalent to 1.378 M.T. of 65% purity Grade . Thus there is a reduction of 37.8% in consumption.

REDUCED HANDLING COST ETC : By using this high purity material , handling charges inclusive manpower can be reduced by 37% due to reduction in consumption . This is a direct saving in labour cost by the same proportion.

REDUCED TRANSPORTATION COST : Total transportation cost for carrying Low Grade (65% Purity) Hydrated Lime = Cost of Carrying 65% Pure material + Cost of Carrying 35% impure material.

Total transportation Cost for carrying High Grade (90% Purity) Hydrated Lime = Cost of carrying 90 % Pure material +Cost of carrying 10% impure material.

Thus it's clear that with same transportation Cost 25% more pure material / utilizable material can be transported .

LESS STORAGE SPACE : As there will be reduction in consumption ,less Godown space would be required for storage purpose , there by, reducing storage problem & Inventory cost.

MINIMIZED DISPOSAL PROBLEM : Due to less consumption less sludge would be generated, resulting in reduced disposal cost. 

ALPHOX 200

Minimum Order Quantity 200 Kg

Alphox - 200 : Chemically the Alphox 200 is ethylene oxide condensate of alkyl phenol. Alphox 200 is
Purity % 99%
Packaging Details 50 Kg / 200 kGS

Synonyms
Alphox - 200 : Chemically the Alphox 200 is ethylene oxide condensate of alkyl phenol. Alphox 200 is

Chemical Formula

Alphox - 200 : Chemically the Alphox 200 is ethylene oxide condensate of alkyl phenol. Alphox 200 is
Alphox - 200 : Chemically the Alphox 200 is ethylene oxide condensate of alkyl phenol. Alphox 200 is having stunning properties such as colourless liquid soluble in water, vegetable oil, alcohol, Glyc Read More.. ... Alphox 200 is also used in liquid detergent with softeners.

CITRIC ACID MONO ANHYDROUS
HS code 29181400

We are having Citric acid Monohydrate as well as anhydrous powder

Product Characteristics: White Crystalline Powders, Colorless Crystals or Granules

Executive Standards：BP/USP/FCC/E330/GB1886.235-2016

Packaging ： plastic woven bag, 25kg net composite paper-plastic bags or 3-ply kraft paper bags with PE liner,500kg or 1000kg net PP woven Jumbo bags

Storage ： kept in a light-proof, well-colsed,dry and cool place

Main Usage： Citric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry, it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.